Company Profile
Quality Assurance
Why Us
FAQ's
Products
Enquiry
Dental Instruments
Acrylizer
ARMS Cable
Burn Out Furnace
Castroviejo Scissors
Centrifico Casting Machine
Dental Amalgamator
Dental Forceps
Dental Handpieces
Dental Impression Trays
Dental Lathe
Dental Model Trimmer
Dental Portable Autoclave
Dental Spare Parts
Dental Surveyor
Dental Vibrator
Dressing Drum
Endo Box
Glass Bead Sterilizers
Gum Scissors
Handpiece Cassette
more..
Laboratory Autoclaves
Cylindrical Autoclave
Portable Autoclave
Rectangular Autoclave
Vertical Autoclave
Please Install Flash Player
Download from here
  

Vertical Autoclave GMP Model

Products » Laboratory Autoclaves » Vertical Autoclave » Vertical Autoclave GMP Model

Vertical Autoclave GMP Model Construction
The inner and outer chamber is made of high-grade stainless steel sheet (SS-304); the strong and sturdy lid is also made of high grade stainless steel plate. (SS-304) The unit is fitted with very efficient radial locking system made of stainless steel bars (ss-304), steel, chrome plated, with paddle lifting device. Supplied complete with stainless steel basket. The unit is fitted with safety valve, pressure release valve, water level indicator, cord and plug. To operate on 220 /230 Volts, 50Hz AC supply.

Documentation
Supplied complete with operation protocol, installation protocol and design qualification certificates along with the necessary hydro test certificates and other calibration certificates.

Mode of Heating
Electrically heated by special flange type / immersion type heaters bearing ISI mark, to operate on 220 /230 Volts, 50Hz AC supply

Working Pressure
The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g ( 15 psi - 17 psi )

Working Temperature : 121° C
Hydrotest Pressure : 2.5 kgf/cm sq.g ( 35 psi )

Working Chamber



Height (mm) XDia (mm) XVolume (Ltrs.)
450mm X250mmX22
500mmX300mmX40
550mmX300mmX50
600mmX450mmX98
750mmX550mmX152

Note : Special sizes can be fabricated as per the customer's requirement.

Standard Controls
  • Double safety radial locking arrangement
  • Stainless steel steam release valve
  • Spring loaded safety valve of stainless steel (grade SS-304)
  • Water inlet and water valves
  • Water level indicating gauge glass with stainless steel guard
  • Pressure guage
  • Electrical control box, fitted with toggle switch, indicating Neon lamps and steam release valve
  • Foot paddle lifting device

Optional Accessories
  • Automatic Pressure Control Switch (Pressure control switch - INDFOSS PIEZOSTAT) - This semi-automatic device controls the pressure inside the chamber mechanically and cuts-off the current from the heating elements, when the desired/ set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level.
  • Automatic Water Cut-off Device - This device is a safety device which protects the heaters from running dry. This device ensures that the machine is automatically switched off in case the desired water level falls below the prescribed level.
  • Temperature Indicator (Dial Type) - This device indicates the temperature inside the chamber.
  • Mechanical Timer with Alarm System - This is a semi-automatic device which is initiated once the pressure level inside the chamber reaches the desired value, it regulates the sterilization time of the media to be sterilized and when the desired time is passed, it activates the buzzer, which indicates that the sterilization cycle is complete and media can be extracted.