Our Rectangular Autoclave is highly famous and is highly demanded by all. We supply our premium quality horizontal rectangular autoclave at one of the most affordable prices for everyone to avail them easily. We have also gained the position one of the preferred rectangular autoclave suppliers in India.
The unit has inner Chamber, Boiler, Lid and Jacket - all made of 304 grade stainless Steel, outer chamber of thick gauge mild steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. It is supplied complete with vacuum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular stand. It is available in the following standard sizes. Operatable on 3 Phase, 440 Volts A.C. Supply.
Mode of Heating
Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 440 volts three phase 50 cycles.
The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g (15 psi - 17 psi)
Working Temperature : 121° C Hydrotest Pressure :
Automatic Pressure Control Switch (Pressure control switch - INDFOSS PIEZOSTAT) -
This semi-automatic device controls the pressure inside the chamber mechanically and cuts-off the current from the heating elements, when the desired/ set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level.
Automatic Water Cut-off Device - This device is a safety device which protects the heaters from running dry. This device ensures that the machine is automatically switched off in case the desired water level falls below the prescribed level.
Temperature Indicator (Dial Type) - This device indicates the temperature inside the chamber.
Mechanical Timer with Alarm System - This is a semi-automatic device which is initiated once the pressure level inside the chamber reaches the desired value, it regulates the sterilization time of the media to be sterilized and when the desired time is passed, it activates the buzzer, which indicates that the sterilization cycle is complete and media can be extracted.